Structures and anion-binding properties of M4L6 tetrahedral cage complexes with large central cavities

Reaction of the bis-bidentate bridging ligand L(3), in which two bidentate chelating 3(2-pyridyl)pyrazole units are separated by a 3,3'-biphenyl spacer, with Co(II) salts affords tetranuclear cage complexes of composition [Co(4)(L(3))(6)]X(8)(X =[BF(4)](-), [ClO(4)](-), [PF(6)](-) or I(-)) in which four 6-coordinate Co(II) ions in an approximately tetrahedral array are connected by six bis-bidentate bridging ligands, one spanning each of the six edges of the Co(4) tetrahedron. In every case, X-ray crystallography reveals that the 'apical' Co(II) ion has a fac tris-chelate geometry, whereas the other three Co(II) ions have mer tris-chelate geometries, resulting in (non-crystallographic)C(3) symmetry for the cages; that this structure is retained in solution is confirmed by (1)H NMR spectroscopy of the paramagnetic cages. In every case one of the anions is located inside the central cavity of the cage, with the remaining seven outside. We found no clear evidence for an anion-based templating effect. The cage superstructure is sufficiently large to leave gaps in the centres of the faces through which the internal and external anions can exchange. Variable-temperature (19)F NMR spectroscopy was used to investigate the dynamic behaviour of the cages with X =[BF(4)](-) and [PF(6)](-) in MeCN solution: in both cases two separate signals, corresponding to external and internal anions, are clear at 233 K which have coalesced to a single signal at room temperature. Analysis of the linewidth of the minor signal (for the internal anion) at various temperatures below coalescence gave an activation energy for anion exchange of ca. 50 kJ mol(-1) in each case, a figure which suggests that anion exchange can occur via a conformational rearrangement of the cage superstructure in solution rather than opening of the cavity by cleavage of metal-ligand bonds.     

1,3-dialkyl- and 1,3-diaryl-3,4,5,6-tetrahydropyrimidin-2-ylidene rhodium(i) and palladium(II) complexes: synthesis, structure, and reactivity

The synthesis of novel 1,3-diaryl- and 1,3-dialkylpyrimidin-2-ylidene-based N-heterocyclic carbenes (NHCs) and their rhodium(i) and palladium(II) complexes is described. The rhodium compounds bromo(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (7), bromo(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (8) (cod=eta(4)-1,5-cyclooctadiene, mesityl=2,4,6-trimethylphenyl), chloro(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (9), and chloro(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (10) were prepared by reaction of [[Rh(cod)Cl](2)] with lithium tert-butoxide followed by addition of 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium bromide (3), 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate (4), 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium bromide (6), and 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate, respectively. Complex 7 crystallizes in the monoclinic space group P2(1)/n, and 8 in the monoclinic space group P2(1). Complexes 9 and 10 were used for the synthesis of the corresponding dicarbonyl complexes dicarbonylchloro(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (11), and dicarbonylchloro[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (12). The wavenumbers nu(CO I)/nu(CO II) for 11 and 12 were used as a quantitative measure for the basicity of the NHC ligand. The values of 2062/1976 and 2063/1982 cm(-1), respectively, indicate that the new NHCs are among the most basic cyclic ligands reported so far. Compounds 3 and 6 were additionally converted to the corresponding cationic silver(i) bis-NHC complexes [Ag(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]AgBr(2) (13) and [Ag[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene](2)]AgBr(2) (14), which were subsequently used in transmetalation reactions for the synthesis of the corresponding palladium(II) complexes Pd(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2) (2+)(Ag(2)Br(2)Cl(4) (4-))(1/2) (15) and Pd[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]Cl(2) (16). Complex 15 crystallizes in the monoclinic space group P2(1)/c, and 16 in the monoclinic space group C(2)/c. The catalytic activity of 15 and 16 in Heck-type reactions was studied in detail. Both compounds are highly active in the coupling of aliphatic and aromatic vinyl compounds with aryl bromides and chlorides with turnover numbers (TONs) up to 2000000. Stabilities of 15 and 16 under Heck-couplings conditions were correlated with their molecular structure. Finally, selected kinetic data for these couplings are presented.     

Wafer-scale periodic nanohole arrays templated from two-dimensional nonclose-packed colloidal crystals

This communication reports a simple yet versatile nonlithographic approach for fabricating wafer-scale periodic nanohole arrays from a large variety of functional materials, including metals, semiconductors, and dielectrics. Spin-coated two-dimensional (2D) nonclose-packed colloidal crystals are used as first-generation shadow masks during physical vapor deposition to produce isolated nanohole arrays. These regular nanoholes can then be used as second-generation etching masks to create submicrometer void arrays in the substrates underneath. Complex patterns with micrometer-scale resolution can be made by standard microfabrication techniques for potential device applications. These 2D-ordered nanohole arrays may find important technological applications ranging from subwavelength optics to interferometric biosensors.     

Stacking due to ionic transport number mismatch during sample sweeping on microchips

Sample stacking can occur in isoconductive buffer systems as a result of ion transport mismatches that cause changes in buffer conductivity during electrophoresis. Fluorescence imaging was used to examine this effect in the sweeping of hydrophobic dyes with sodium dodecyl sulfate (SDS) on microchips. Imaging revealed the occurrence of a stacking effect in a sodium borate buffer system in which the sample buffer and SDS-containing run buffer had the same initial conductivity. Injected sample plugs were first swept by SDS micelles and the swept band was then stacked at the trailing end of the sample zone. This effect is due to changes in conductivity at both the front and back interfaces of the injected sample plug and can be modeled by moving boundary equations. Maximum signal enhancements of 86-, 160- and 560-fold were obtained for Rhodamine 560, Rhodamine B and Rhodamine 6G, respectively, by the combination of sweeping and stacking within a 1 cm section of microchannel. Based on sample sweeping/stacking and manipulation of the electric field polarity, a method of trapping and concentrating analyte from multiple injections was also demonstrated.     

Structure activity relationship by NMR and by computer: a comparative study

There has recently been considerable interest in using NMR spectroscopy to identify ligand binding sites of macromolecules. In particular, a modular approach has been put forward by Fesik et al. (Shuker, S. B.; Hajduk, P. J.; Meadows, R. P.; Fesik, S. W. Science 1996, 274, 1531-1534) in which small ligands that bind to a particular target are identified in a first round of screening and subsequently linked together to form ligands of higher affinity. Similar strategies have also been proposed for in silico drug design, where the binding sites of small chemical groups are identified, and complete ligands are subsequently assembled from different groups that have favorable interactions with the macromolecular target. In this paper, we compare experimental and computational results on a selected target (FKBP12). The binding sites of three small ligands ((2S)1-acetylprolinemethylester, 1-formylpiperidine, 1-piperidinecarboxamide) in FKBP12 were identified independently by NMR and by computational methods. The subsequent comparison of the experimental and computational data showed that the computational method identified and ranked favorably ligand positions that satisfy the experimental NOE constraints.     

Simultaneous determination of zidovudine and lamivudine from rat tissues by liquid chromatography/tandem mass spectrometry

A simple liquid chromatography/tandem mass spectrometry (LC/MS/MS) method has been developed and validated for the simultaneous determination of zidovudine (AZT) and lamivudine (3TC) in rat plasma, amniotic fluid, placental, and fetal tissues. Samples were processed by acetonitrile precipitation. Chromatography was performed using a C18 column (5 microm, 150 x 3.9 mm i.d). The mobile phase consisted of 30% methanol and 7.5 mM ammonium acetate (pH 6.5). The method was validated in the range of 0.05-25 microg/mL for both 3TC and AZT in the four biological matrices. Finally, the method was applied to a study involving fetal transport following co-administration of these compounds at a dose of 25 mg/kg each in a pregnant rat.     

Mixed-metal cluster chemistry. 28. Core enlargement of tungsten-iridium clusters with alkynyl, ethyndiyl, and butadiyndiyl reagents

Reaction of [WIr3(mu-CO)3(CO)8(eta-C5Me5)] (1c) with [W(C[triple bond]CPh)(CO)3(eta-C5H5)] afforded the edge-bridged tetrahedral cluster [W2Ir3(mu4-eta2-C2Ph)(mu-CO)(CO)9(eta-C5H5)(eta-C5Me5)] (3) and the edge-bridged trigonal-bipyramidal cluster [W3Ir3(mu4-eta2-C2Ph)(mu-eta2-C=CHPh)(Cl)(CO)8(eta-C5Me5)(eta-C5H5)2] (4) in poor to fair yield. Cluster 3 forms by insertion of [W(C[triple bond]CPh)(CO)3(eta-C5H5)] into Ir-Ir and W-Ir bonds, accompanied by a change in coordination mode from a terminally bonded alkynyl to a mu4-eta2 alkynyl ligand. Cluster 4 contains an alkynyl ligand interacting with two iridium atoms and two tungsten atoms in a mu4-eta2 fashion, as well as a vinylidene ligand bridging a W-W bond. Reaction of [WIr3(CO)11(eta-C5H5)] (1a) or 1c with [(eta-C5H5)(CO)2 Ru(C[triple bond]C)Ru(CO)2(eta-C5H5)] afforded [Ru2WIr3(mu5-eta2-C2)(mu-CO)3(CO)7(eta-C5H5)2(eta-C5R5)] [R = H (5a), Me (5c)] in low yield, a structural study of 5a revealing a WIr3 butterfly core capped and spiked by Ru atoms; the diruthenium ethyndiyl precursor has undergone Ru-C scission, with insertion of the C2 unit into a W-Ir bond of the cluster precursor. Reaction of [W2Ir2(CO)10(eta-C5H5)2] with the diruthenium ethyndiyl reagent gave [RuW2Ir2{mu4-eta2-(C2C[triple bond]C)Ru(CO)2(eta-C5H5)}(mu-CO)2(CO)6(eta-C5H5)3] (6) in low yield, a structural study of 6 revealing a butterfly W2Ir2 unit capped by a Ru(eta-C5H5) group resulting from Ru-C scission; the terminal C2 of a new ruthenium-bound butadiyndiyl ligand has been inserted into the W-Ir bond. Reaction between 1a, [WIr3(CO)11(eta-C5H4Me)] (1b), or 1c and [(eta-C5H5)(CO)3W(C[triple bond]CC[triple bond]C)W(CO)3(eta-C5H5)] afforded [W2Ir3{mu4-eta2-(C2C[triple bond]C)W(CO)3(eta-C5H5)}(mu-CO)2(CO)2(eta-C5H5)(eta-C5R5)] [R = H (7a), Me (7c); R5 = H4Me (7b)] in good yield, a structural study of 7c revealing it to be a metallaethynyl analogue of 3.     

Role of the A-ring of bryostatin analogues in PKC binding: synthesis and initial biological evaluation of new A-ring-modified bryologs

The syntheses of three newly designed bryostatin analogues are reported. These simplified analogues, which lack the A-ring present in the natural product but possess differing groups at C9, were obtained using a divergent approach from a common intermediate. All three analogues exhibit potent, single-digit nanomolar affinity to protein kinase C.     

Simple methods for the direct assembly, functionalization, and patterning of acid-terminated monolayers on Si111

This article describes mild methods to directly assemble, functionalize, and pattern monolayers of undecylenic acid on hydrogen-terminated Si(111). These monolayers were assembled under very mild conditions from a neat solution of undecylenic acid containing 0.1 mol % 4-(decanoate)-2,2,6,6-tetramethylpiperidinooxy at room temperature without the need for UV light. Because of these mild conditions, monolayers exposing carboxylic acids could be assembled in one step without the need to protect the acid prior to its assembly. The monolayers were extensively characterized by horizontal attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle goniometry. The monolayers bonded to the silicon surface preferentially through the olefin with no detectable bonds between the carboxylic acids and silicon. The crystallinity of the monolayer was studied by infrared spectroscopy through the antisymmetric--v(a)(CH(2))--and symmetric--v(s)(CH(2))--stretches for methylene. Because it is important for future applications to assemble functional surfaces, methods to react the acid-terminated monolayers with trifluoroacetic anhydride and triethylamine to yield a symmetric anhydride on the monolayer were studied. These anhydrides were reacted with a variety of milligram-quantity amines to yield amide-terminated surfaces. This method was general, and a variety of amines could be bonded to the monolayer. The stabilities of these monolayers upon exposure to ambient conditions and under a variety of solvents were described. Because patterned monolayers have found wide applications, we have developed methods to pattern 1-octadecylamine and poly(ethylenimine) on the micrometer scale using soft lithography. In addition, polymer brushes of polynorbornene with thicknesses from 32 to 150 nm were grown from monolayers patterned with the Grubbs' catalyst. The patterned surfaces were imaged by scanning electron microscopy, scanning probe microscopy, and ellipsometry to determine the thicknesses of the patterns and the fidelity of the method.     

Diatropicity of 3,4,7,8,9,10,13,14-octadehydro[14]annulenes: a combined experimental and theoretical investigation

The synthesis and study of a series of octadehydro[14]annulenes is described. The aromaticity of these annulenes was investigated through examination of experimental data from arene-fused systems as well as calculated nucleus-independent chemical shifts (NICS) and bond lengths. Benzene ring fusion to the parent system results in a stepwise loss in aromaticity as the number of fused rings is increased from one to two to three. This decrease in annulenic ring current is manifested in the alkene proton chemical shifts (0-2 benzenes) as well as the NICS (0-3 benzenes). Comparison of isomeric thiophene-fused annulenes shows further evidence of ring current competition as these allow for observation of intermittent degrees of delocalization throughout the annulenic core. A consistent relationship between the magnitude of the NICS values and the degree of benzannelation is also observed.